On the X-ray tables of the AGA-POWER-DUO-LIFT series from AGA Sanitätsartikel, the electric height adjustment and tilt adjustment are operated via a multitasking-capable hand switch. The hand switch is equipped with six buttons and allows simultaneous control of the height and inclination adjustment.
Features
The black, radiolucent support plates (tabletop), made of regenerated PE-1000, have a thickness of 15 mm (for table width 650 mm) and 25 mm (for table width 800 mm).
To ensure high stability, the base frame is supplied with levelling feet as standard.
Electromotive height adjustment approx. 550 – 800 mm.
There are no metal parts in the area between the lifting columns (for a 650 mm table width, approx. 1,300 x 600 mm, L x W, and for an 800 mm table width, approx. 1,300 x 750 mm, L x W).
There are no metal parts in the area between the lifting columns (for a 650 mm table width, approx. 1,300 x 600 mm, L x W, and for an 800 mm table width, approx. 1,300 x 750 mm, L x W).
The headrest can be adjusted in 13 locking steps up to +30°. The position of the headrest may be on the left or right side. If no side is specified when placing the order, the X-ray table will be delivered with a headrest on the right side.
The two lifting columns (low-voltage electric drives), which are characterized by their smooth running, are made of anodized light metal and are controlled by a transformer and operated by a hand switch. Connection values per motor unit: 230V, 50/60Hz, 6.0A, 240W, IPX6, v=16mm/s, 2 x 1,000N.
Electromotive Trendelenburg / Anti-Trendelenburg position of 11° each.
USDEnglish
TRYTurkish
Request a Meeting
