The X-ray tables AGA-POWER-LIFT and AGA-POWER-DUO-LIFT must be permanently connected to the power circuit for height adjustment and tilt adjustment. The AGA-AKKU-POWER-LIFT X-ray tables from AGA Sanitätsartikel are equipped with battery-controlled drives for height adjustment. The height adjustment is operated via a hand switch equipped with two buttons.
Features
The black, radiolucent support plates (tabletop), made of regenerated PE-1000, have a thickness of 15 mm (for table width 650 mm) and 25 mm (for table width 800 mm).
To ensure high stability, the base frame is supplied with levelling feet as standard.
The height adjustment 460 – 860 mm, is controlled via a hand switch with 2 buttons (system with key lock and emergency stop).
There are no metal parts in the area between the lifting columns (for the 650 mm table width, approx. 1,200 x 600 mm, L x W, and for the 800 mm table width, approx. 1,200 x 750 mm, L x W).
Please note that with the X-ray table with a 2-piece tabletop, the areas of the headrest and the transition to the main surface are only partially radiolucent due to the hinges and the grid.
The headrest can be adjusted in 13 locking steps up to +30°. The position of the headrest may be on the left or right side. If no side is specified when placing the order, the X-ray table will be delivered with a headrest on the right side.
The two telescopic lifting columns are made of anodized light metal and are controlled by a battery and operated by a hand switch with 2 buttons. Connection values per battery unit: 230V, 50/60Hz, 4.0A, 160W, IPX6, v=16mm/s, 2 x 2,000N.
The standard configuration includes:
Hand switch with spiral cable and two buttons (up/down).
USDEnglish
TRYTurkish
Request a Meeting
