Line Shut-off Valves are cleaned for medical gas use and 100% hydrostatic tested, these 3 piece medical gas valves are designed to meet the NFPA 99c, ISO 7396-2 & G-01 standards
SPECIFICATIONS
Valve shall be 3 piece ball-type full bore design, with a bronze/ brass body, stainless steel ball, stem, bolts & nuts.
Seat shall be Teflon (RPTFE) and seal Viton.
Valves 1/2” to 2” shall have a minimum pressure rating of 4137 kpa (600 psi) wog. Valves 3” to 4” shall have a minimum pressure rating of 2758 kpa (400 psi) wog.
Valve shall require only a quarter turn from a fully open position to a fully closed position.
Extension stubs shall be K type with a minimum of 150 mm long to allow brazing without damaging the valve seat and seals due to heat transfer
Each valve shall be hydrostatically tested for leakages.
Each valve shall be washed and degreased for medical gas use.
Pipe stub extensions shall be capped at both ends.
The valves shall be supplied in sealed plastic bags, marked with “Oxygen” or “cleaned for oxygen use”, to prevent contamination before installation.
Valves shall be Silbermann model SP150 or equivalent.
All valves shall comply with NFPA 99, ISO 7396-1 & G-01 standards.
USDEnglish
TRYTurkish
Request a Meeting
